Analog Displays; Analog Display, Digital Remote Controls With Digital To Analog Converter - BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual

Diagrams

Analog Displays

14 Analog Display, Digital Remote Controls With
Ref Description
1 Digital to Analog Converter
2 *Harness (Single or Port Engine/Tachometer)
3 Trim Send Connection
4 Non-SystemCheck Connection
5 SystemCheck Tachometer Connection
6 Warning Horn Connection
7 Harness (Dual Engine/Starboard Tachometer)
8 Trim Send Connection
9 Non-SystemCheck Connection
10 SystemCheck Tachometer Connection
11 Warning Horn Connection
12 Converter Power Connection (12 VDC)
13 NMEA 2000 Network Connection
14 Power Node and Tee Kit
15 * "Y" Harness
16 Terminator Kit
17 NMEA 2000 Network Connection
18 NMEA 2000 Buss Cables
2 ft. (0.6 m)
6 ft. (1.8 m)
15 ft. (4.5 m)
25 ft. (7.6 m)
19 NMEA 2000 Network Connection (to engine)
20 Key Switch (OFF – ON – START)
21 Remote Control
22 *Harness
23 Accessory Power Out (12 VDC)
24 Network Power Cable, 15 ft. (4.5 m)
24 Network Power Cable, 25 ft. (7.6 m)
NS Network Power Cable Extension, 5 ft. (1.5 m)
NS Network Power Cable Extension, 10 ft. (3.0 m)
25 Fuel Tank Sender
26 Battery Cable, 10 ft. (3.0 m)
26 Battery Cable, 15 ft. (4.5 m)
26 Battery Cable, 20 ft. (6.0 m)
140
Analog Displays
Digital to Analog Converter
P/N Notes
766287
587212 Included with Converter
–
–
–
–
Optional (use for starboard gauges in a dual engine
587213
installation)
– Optional
– Optional
– Optional
– Optional
–
–
767433 3 Amp fuse
587230
764155
–
–
765132
764161
764162
764163
764155
768746
– Refer to Parts & Accessories Catalog
– Included with Remote Control
–
587184 10 Amp fuse
587183 10 Amp fuse
587185
587186
–
587205
587301
587302