Download
Share
Print this page
Elkay LZ Series Installation & Use Manual
  1. Manuals
  2. Brands
  3. Elkay Manuals
  4. Water Dispenser
  5. LZ Series
  6. Installation & use manual

Elkay LZ Series Installation & Use Manual

Bottle filling stations & coolers
Hide thumbs Also See for LZ Series:

Advertisement

Quick Links

Download this manual See also: Installation, Use & Care Manual
ENLZSTL8WS_1G
Enhanced
INSTALLATION & USE MANUAL
LZ
Series Bottle Filling Stations & Coolers
™
* Versatile cooler design allows units to be installed either left-hand high and right-hand low or left-low and right high.
Basin change may be required. See desired rough-in to help determine if the basin change is necessary.
Important: The refrigerated coolers must be hung on the right side.
Page 1
1000004543 (Rev. C - 07/19)

Advertisement

loading

Related Manuals for Elkay LZ Series

Summary of Contents for Elkay LZ Series

  • Page 1 ENLZSTL8WS_1G Enhanced INSTALLATION & USE MANUAL Series Bottle Filling Stations & Coolers ™ * Versatile cooler design allows units to be installed either left-hand high and right-hand low or left-low and right high. Basin change may be required. See desired rough-in to help determine if the basin change is necessary. Important: The refrigerated coolers must be hung on the right side.
  • Page 2 ENLZSTL8WS_1G FIG. 1 1000004543 (Rev. C - 07/19) Page 2...
  • Page 3 ENLZSTL8WS_1G FIG. 2 Page 3 1000004543 (Rev. C - 07/19)
  • Page 4 ENLZSTL8WS_1G FIG. 3 1000004543 (Rev. C - 07/19) Page 4...
  • Page 5 ENLZSTL8WS_1G FIG. 4 Page 5 1000004543 (Rev. C - 07/19)
  • Page 6 ENLZSTL8WS_1G HANGER BRACKETS INSTALLATION 1) Remove hanger bracket fastened to back of coolers by removing one (1) screw. 2) Determine your mounting configuration from the figures shown on pages 2 - 5. Refrigeration unit must be on right hand side. IMPORTANT NOTE: If the Bottle Filler is to be mounted on the left hand cooler, a basin assembly change will be needed.

  • Page 7: Bottle Filler Installation

    ENLZSTL8WS_1G BOTTLE FILLER INSTALLATION 14) Remove two (2) mounting screws with 5/32” Allen wrench holding Bottle Filler to wall mounting plate (See Fig. 8). Note do not discard mounting screws, they will be needed to secure Bottle Filler to wall mounting plate. 15) Remove wall mounting plate from Bottle Filler (see Fig.
  • Page 8 ENLZSTL8WS_1G FINAL INSTALLATION (FILTER) FIG. 12 21) Remove filter from carton, remove protective cap, attach filter to filter head by firmly inserting into head and rotating filter clockwise. Ensure that filter label can be read when filter is installed. (See Fig. 12) 22) Turn water supply on and inspect for leaks.
  • Page 9 ENLZSTL8WS_1G CONFIGURATION INSTRUCTIONS INSTRUCTIONS TO MOVE THE BOTTLE FILLER & BASIN TO THE LEFT SIDE (NON-REFRIGERATED) FOR ALTERNATE MOUNTING VERSATILE BI-LEVEL Fig. B Fig. A Fig. C ONLY move the filler panel and j-clip 1. Using a 5/16” socket, remove the (4) screws from the bottom of each cooler to to the refrigerated (right) side if right remove the wrappers.
  • Page 10 ENLZSTL8WS_1G Refrigerated Cooler side: Carefully lift and tip the shroud/basin assembly off the cooler frame. Only disconnect the (2) black wires coming from the shroud assembly that go to the solenoid valve and to the cold control. Disconnect the water line at the solenoid valve.
  • Page 11 ENLZSTL8WS_1G PLUMBING DIAGRAMS VERSATILE BI-LEVEL Bottle Filler Drain Bottle Filler Drain Bottle Filler Drain Bottle Filler Drain Page 11 1000004543 (Rev. C - 07/19)
  • Page 12 ENLZSTL8WS_1G Versatile Wrapper and Trim Kit Installation Instructions Left Hand Wrapper (High Side) Right Hand Wrapper (Low Side) 1) Remove existing wrapper by removing the (4) screws 1) Remove existing wrapper by removing the from bottom. (4) screws from bottom. 2) Screw trim piece to wrapper with (2) screws (provided) 2) Clip cover plate, sliding until plate sits flush 3) Re-install wrapper with (4) screws.
  • Page 13 ENLZSTL8WS_1G Versatile Wrapper and Trim Kit Installation Instructions continued. . . Instrucciones de instalación versátiles de la envoltura y del juego de molduras continuadas. . . Instructions d’installation du kit d’emballage et de garniture polyvalentes (suite). . . Left Hand Wrapper (Low Side) 1) Remove existing wrapper by removing the (4) screws from bottom.
  • Page 14 ENLZSTL8WS_1G 115V Refrigerated Wiring Diagram with Alpha/Numeric Display Fig. 19 SUPERSEAL FITTING ASSEMBLY OPERATION OF QUICK CONNECT FITTINGS OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET TUBE IS SECURED PUSH IN COLLET TUBE TO ATTACH IN POSITION TO RELEASE TUBE...
  • Page 15 ENLZSTL8WS_1G Basin Locknut BUBBLER DETAIL Fig. 22 NOTE: When installing replacement bubbler and pedestal, tighten nut only to hold parts snug in position. Do Not Overtighten. Fig. 23 WATERSENTRY Filter Detail ® WATERSENTRY FILTER PARTS LIST ® ITEM NO. PART NO. DESCRIPTION 51300C Filter Assy - 3000 Gal.
  • Page 16 ENLZSTL8WS_1G Service Instructions Refrigerated Unit Lower and Upper Shroud To access the refrigeration system and plumbing connections, remove four screws from bottom of cooler to remove the lower shroud. To remove the upper shroud for access to the pushbars, regulator, solenoid valve or other components located in the top of the unit, remove lower shroud, disconnect drain, remove four screws from tabs along lower edge of upper shroud, unplug two wires and water tube.
  • Page 17 ENLZSTL8WS_1G Page 17 1000004543 (Rev. C - 07/19)
  • Page 18 ENLZSTL8WS_1G Pictured is unit only without bottle filler. Note: Danger! Electrical shock hazard. Disconnect power before servicing unit. Uses HFC-134A refrigerant Usa refrigerante HFC-134A Utilise du fluide frigorigéne HFC-134A 12, 13 See Fig. 25 See Fig. 24 12, 13 Fig. 26 1000004543 (Rev.
  • Page 19 ENLZSTL8WS_1G ATTENTION: If the product serial number is before 190424189, please refer to archived documents section of Elkay.com for the most accurate parts list. (www.elkay.com/archived-documents) 115V PARTS LIST / LISTA DE PIEZAS DE 115 V / LISTE DES PIÈCES 115 V ITEM NO.

  • Page 20: Fcc Compliance Statement

    INFORMATIONS POUR LE SERVICE PAR NUMERO SANS FRAIS 1.800.260.6640 PRINTED IN U.S.A. IMPRESO EN LOS E.E.U.U. ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 • www.elkay.com IMPRIMÉ AUX É.-U. 1000004543 (Rev. C - 07/19)

This manual is also suitable for:

Lzstl8ws 1d series