SolarEdge StorEdge Solution with Backup Installation Manual page 81

80 Configuration Menu Options
Communication
1. Select the Communication option to define and configure:
The communication option used by the inverter to communicate with the
SolarEdge monitoring platform
The communication option used to communicate between multiple SolarEdge
devices or other external non-SolarEdge devices, such as energy meters or
loggers.
2. Select Server to set which communication method is used to communicate between
devices and the monitoring platform. Refer to Setting Up Communication to the
Monitoring Platform on page 96 for a full description of these communication
options.
NOTE
The Server menu shows only the communication options installed in the
inverter.
The following shows a hierarchical tree of the menu options in the Communication
menu.
For detailed information about all the configuration options, refer to the
Communication Options Application Note , available on the SolarEdge
website at
http://www.solaredge.us/files/pdfs/solaredge-communication_
options_application_note_v2_250_and_above.pdf.
(1)
Communication ,
S e r v e r < L A N >
L A N C o n f
R S 4 8 5 – 1 C o n f < S >
R S 4 8 5 – 2 C o n f < S >
Z i g B e e C o n f < S >
C e l l u l a r C o n f
G P I O C o n f < M T R >
Server:
(1) When using the SolarEdge Cellular Plug-in with the provided SIM card, the Cellular Conf menu is unavailable.
(2) When using the SolarEdge GSM products, RS232 Conf menu is unavailable.
(2)
:
StorEdge Solution with Backup MAN-01-00262-1.5