Configuration Menu Options - SolarEdge StorEdge Solution with Backup Installation Manual

Configuration Menu Options

Country and Grid
1. Select the Country option to specify the country or region in which the inverter is
installed and the grid to which it is connected. This parameter may arrive pre-
configured. If so, verify that it is set to the proper country or region.
WARNING!
The inverter must be configured to the proper country/ region in order to
ensure that it complies with the country grid code and functions properly
with the country grids.
AVERTISSEMENT!
L'onduleur doit être configuré pour le pays approprié afin d'assurer un
fonctionnement convenable avec le réseau de ce pays.
A list of countries is displayed. If no country is configured, the value is <NONE>.
NOTE
If an inverter is not configured to any country, it will not produce energy,
and the following message will be displayed on the LCD:
No Country Selected
A plus sign (+) near the country indicates that another menu will be displayed after
selection.
When selecting Auto , the inverter automatically detects the used grid.
When selecting an option with No Neutral or No N, connection to Neutral line
is not required. For any other option, you must connect the Neutral line.
2. Confirm your country selection in the confirmation screen: Toggle to YES and press
Enter.
Language
1. Select the Language option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to YES and
press Enter.
StorEdge Solution with Backup MAN-01-00262-1.5
Chapter 8: User Interface 79