SolarEdge StorEdge Solution with Backup Installation Manual page 56

Physical Layout Editor
1. If you are a registered installer, access the monitoring platform site
creation page at
web/p/home#createSites
https://monitoring.solaredge.com/solaredge-web/p/createSelfNewInstaller
2. Fill out all required information in the screen, which includes information about
your installation, as well as details about its logical and physical mapping.
Using a Paper Template
Fill out the Physical Layout Template (downloadable from the SolarEdge
website
http://www.solaredge.com/files/pdfs/physical-layout-
) using the detachable 2D barcode stickers on each power
template.pdf
optimizer. Once the form is completed, use the Mapper to scan the 2D
codes and create the map in the monitoring platform. Optionally, you can
send the sticker sheet to SolarEdge Support for physical layout creation.
StorEdge Solution with Backup MAN-01-00262-1.5
https://monitoring.solaredge.com/solaredge-
. If you have not yet signed up, go to
Chapter 6: Commissioning the Installation 55
.