Step 2: Connecting A Pv Module To A Power Optimizer - SolarEdge StorEdge Solution with Backup Installation Manual

28 Step 2: Connecting a PV Module to a Power Optimizer
5. Verify that each power optimizer is securely attached to the module support
structure.
6. Record power optimizer serial numbers and locations, as described in Step 4:
Reporting and Monitoring Installation Data on page 53.

Step 2: Connecting a PV Module to a Power Optimizer

NOTE
Images are for illustration purposes only. Refer to the label on the product to
identify the plus and minus input and output connectors.
For each of the power optimizers:
Connect the Plus (+) output connector of the module to the Plus (+) input
connector of the power optimizer.
Connect the Minus (-) output connector of the module to the Minus (-) input
connector of the power optimizer.
Figure 5: Power optimizer grounding terminal
Figure 6: Power optimizer connectors
StorEdge Solution with Backup MAN-01-00262-1.5