Step 1: Mounting And Grounding The Power Optimizers - SolarEdge StorEdge Solution with Backup Installation Manual

When installing modules in a confined space, for example, if installing Building-
integrated photovoltaic (BIPV) modules, ventilation measures may be needed to
ensure the power optimizers are not be exposed to temperatures outside their
specifications.
NOTE
The images contained herein are for illustrative purposes only and may vary
depending on product models.
Step 1: Mounting and Grounding the Power
Optimizers
For each of the power optimizers
1. Determine the power optimizer mounting location and use the power
optimizer mounting brackets to attach the power optimizer to the
support structure (See Figure 3 ). It is recommended to mount the
power optimizer in a location protected from direct sunlight. For
frame-mounted power optimizers follow the instructions supplied
with the optimizers, or refer to
frame_mounted_power_optimizers.pdf
2. If required, mark the mounting hole locations and drill the hole.
(1) Not applicable to smart modules.
StorEdge Solution with Backup MAN-01-00262-1.5
Chapter 2: Installing the Power Optimizers
Figure 2: Power optimizer clearance
(1)
:
https://www.solaredge.com/sites/default/files/installing_
.
25