SolarEdge StorEdge Solution with Backup Installation Manual page 151

150 StorEdge Inverter
INPUT - DC (PV)
Maximum DC Power (STC)
(2)
Max Input Current
2-pole Disconnection
INPUT - DC (BATTERY)
Supported Battery Types
Number of Batteries per Inverter
Continuous Power
Peak Power
Max Input Current
DC Fuses on Plus and Minus
2-pole Disconnection
ADDITIONAL FEATURES
Supported Communication
Interfaces
Revenue Grade Data, ANSI C12.1
Integrated AC, DC and
Communication Connection
Unit
AC Disconnect
Manual Inverter Bypass Switch
DC Voltage Rapid Shutdown (PV
and Battery)
Auto-transformer thermal
protection
(1) These specifications apply to inverters with part numbers SE3800A-USS2XXXXX or SE7600A-USS2XXXXX and
connection unit model number BCU-1PH-USS.
(2) A higher current source may be used; the inverter will limit its input current to the values stated.
(3) When connecting two LG Chem batteries, each battery must have a different part number; supporting SolarEdge
firmware is required.
(4) Revenue grade inverter P/N: SExxxxA-USS2xxxYx or SExxxxA-USS2xxxMx
(5) If the inverter is located in a place that is not easily accessible by emergency responders (according to the National
Electrical Code, 2017), an external shutdown switch must be installed. Use inverters with PN SExxxxA-USS2R.
(1)
SE3800A-US
5100
13
LG Chem RESU10H
1 or 2
25A (field replaceable)
RS485 for battery, RS485, Ethernet, Cellular,
ZigBee (optional)
Optional
Yes, according to NEC 2014 and 2017 690.12
StorEdge Solution with Backup MAN-01-00262-1.5
(1)
SE7600A-US
10250
23
Yes
(3)
5000
7000
17.5
Yes
(4)
Yes
Yes
Yes
(5)
Yes
Unit
W
Adc
W
W