Chapter 10: System Configuration; Upgrading The Inverter Firmware Version - SolarEdge StorEdge Solution with Backup Installation Manual

Chapter 10: System Configuration

109
Chapter 10: System Configuration
This chapter describes how to configure your StorEdge system by setting up the
communication between the system components and setting up the required
application. To use the StorEdge applications, the communication board firmware
(CPU) version must be 3.xxxx and later on all SolarEdge inverters at the same site . The
latest firmware version is available for download at .
http://solaredge.com/storedge/firmware

Upgrading the Inverter Firmware Version

Upgrade the inverter firmware using the card supplied with the StorEdge Interface.
Upgrade the inverter firmware using a MicroSD card with the latest firmware version
downloaded from the above link .
To upgrade the inverter firmware:
1. Make sure that:
StorEdge Solution with Backup MAN-01-00262-1.5