ZigBee
This option enables wireless connection of one or several devices to a
ZigBee Gateway, for wireless communication to the monitoring platform.
The ZigBee Gateway is provided with an installation guide, which should
be reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-zigbee-home-gateway-
.
installation-guide.pdf
Communication Connectors
Two communication glands are used for connection of the various communication
options. Each gland has three openings. The table below describes the functionality of
each opening. Unused openings should remain sealed.
Gland#
Opening
One small
1 (PG16)
Two large
2 (PG13.5) All three
The communication board has a standard RJ45 terminal block for Ethernet connection,
and a 9-pin terminal block for RS485 connection, as shown below:
StorEdge Solution with Backup MAN-01-00262-1.5
Chapter 9: Setting Up Communication to the Monitoring Platform
Functionality
External antenna cable
Ethernet connection
(CAT5/6), ZigBee, or
Cellular
RS485
Figure 33: Communication Glands
Cable size (diameter)
2-4 mm
4.5-7 mm
2.5-5 mm
99