Function Chart; Connection Of A Time Switch For "Locked" (Sur-V) - Record DFA127 Instructions Manual

16.3.1

Function chart:

BDE2 / clamp 2
(L = interruption or 0 V, H = +24 V)
16.4

Connection of a time switch for "locked" (SUR-V)

* Contact closed
Contact open
102-127108955
BDE2 / clamp 2
Toggle switch BDI on the side cover or external
BDE1 / clamp 1
L
H
L
NOTICE
In combination with a BDE-D control unit, it is recommended to activate the con-
trol lock of the BDE-D (
Otherwise, the door can no longer be unlocked using an external mechanical
BDE-M or external signals to the BDI-M circuit board after selection of the
cked
operating mode if it has been locked in the meantime with the BDE-D!
Mechanical BDE (external BDE)
MS BDE-M (102-016841000)
BDE1 / clamp 1
L
L
H
H
Function if the external
mech. BDE is not con-
H continuously open
L
L automatic
= mode of operation according to the position of
the operation switch
= Mode of operation
or ).
V1.1
Configurations
L
H continuously open
H
L
Function if the external
mech. BDE will be con-
figured
continuously open
manual
Locked
16
Function
locked
manual
automatic
figured
automatic
locked
Lo-
81/ 102