Operating Modes And Behaviour Of The Door During Input Signals - Record DFA127 Instructions Manual

14.2.2

Operating modes and behaviour of the door during input signals

Table of signals (X marks a release reaction)
Explanation of the abbreviations see chapter
Automatic /
Normal operation. The door opens and closes automatically, either by triggering of an activa-
tion device or by pushing the door, if the "touch control (push to activate)" is active.
AKA
SSK
SIO
TIPP
Manual operation /
In this mode the operator works as a normal door closer. It is easy to open the door by hand
and closes automatically. The actuating devices connected are ignored.
One-Way traffic /
In the One-Way traffic mode, people cannot enter the room from the outside, but can leave it
from the inside.
AKA*
SSK
SIO
TIPP
* AKA is active as safety device while closing
Continuously open /
The door is opened and stays open. If an obstruction stands in the way while opening, the
operator tries another five times whithin a few seconds to bring the door to the target posi-
tion. Should the obstruction remain, the current position is then validated as the continuously
open position.
102-127108955
AUTO
CLOSED
AKI X
X
X
SIS
X
CLOSED
AKI X
X
SIS
Operating instructions DFA 127
Abbreviations
OPENING
X
X
X
X
HAND
EXIT
OPENING
X
X
X
X
OPEN
V1.1
OPEN CLOSING
X
X
X
X
X
OPEN CLOSING
X
X
X
X
X
14
X
X
X
X
X
X
X
X
X
X
56/ 102