13.3
Simplified Start-Up
Learning running parameters
Learning sensors
102-127108955
IMPORTANT
The simplified start-up is only possible as of software version 2.10.
NOTICE
During the start-up procedure, it is important that no objects or persons are within
the passage.
NOTICE
Configure system
The function
Commissioning DFA 127
After the first installation of the BDE-D, the follow-
ing display appears:
▪ Navigation through the menu with button
and button
▪ Select language and confirm with button
▪ Exit the menu with button
Press the multifunction key until the diode emits 4
light pulses.
The following menu appears:
Show status
▪
Configure system
▪
tem parameters)
Param STG
▪
rameters for STG)
Param Sensor
▪
parameters for sensors)
is not supported by software version 2.30.
V1.1
(show current status)
(setting important sys-
(access for experts, all pa-
(access for experts, all
13
50/ 102