Product Safety; State Of The Technology; Intended Use; Danger Zones - Record DFA127 Instructions Manual

2.3

Product safety

2.3.1

State of the technology

The installation has been constructed with state of the art technology and recognized techni-
cal safety regulations. The system complies with the requirements of Machine Guideline
2006/42/EG as well as of EN 16005 and DIN 18650 (D).
Nevertheless, danger can arise if not used as intended.
2.3.2

Intended use

The swing door drive has been designed and constructed exclusively for use as a pedestrian
passage. Transport of persons on the rotating or moving parts of the system is prohibited.
The installation needs to be carried out in a dry location, either within or inside a building.
Any different application or use beyond this purpose is not considered to be use for the in-
tended purpose. The manufacturer declines all responsibility for any damage resulting from
misuse; the operator alone will bear the associated risk.
Use for the intended purpose also includes observation of the operating conditions specified
by the manufacturer, including the use and adjustment of the correct type of arms, in addi-
tion to regular maintenance, repair and control.
2.4

Danger zones

2.4.1

Security- and surveillance equipment

The passages of the plant are monitored by sensors. It is important that they work faultlessly
and are under no circumstances set out of service.
2.4.2

Danger warnings on the product

If necessary, the country specific regulations have to be adhered to.
2.4.3

Qualifications, skills and training of staff

Mechanic
Commissioning
Service Employees
2.4.4

Reconstructions and changes to the product

Unauthorized modifications to the installation will release the manufacturer from all liability
for any resulting damage.
102-127108955
IMPORTANT
Installation, maintenance and repairs must only be performed by qualified, trai-
ned and authorized technicians.
A risk assessment has been carried out for the whole installation.
Technical training with very good electrical and mechanical skills
Site experience
Technical training with very good electrical and mechanical skills
Experience in field service
V1.1
Safety instructions
2
13/ 102