Accessories And Special Applications For The Dfa 127 - Record DFA127 Instructions Manual

1.5

Accessories and special applications for the DFA 127

External electronic control unit BDE-D
With the external BDE-D available in flush and wall-mounted versions, 5 operating modes
can be easily selected remotely.
Master / Slave
In master / slave mode, two DFA 127 units may be controlled without additional mechanical
components using an electronic sequential control.
For double-leaf automatic door control systems the integrated record SFR 127 mechanical
sequential control is available in two installation kits for right stationary wing leaf and left sta-
tionary wing leaf. For the construction of this drive system, only a drive height of 108 mm is
suitable.
For additional information, please refer to the Installation and Commissioning Manual Se-
quential Control SFR 127 (No. 102-127110731).
Extended drive cladding
The installation of additional devices and sensors is possible with the use of an extended
drive cladding (e.g. integrated fire control).
Flexible cabling
With flexible cabling, the wiring of a DFA fixed to a movable door leaf can be elegantly car-
ried out.
102-127108955 V1.1
1
General
10/ 102