Immergas MAGIS PRO ERP Instruction And Recommendation Booklet page 3

Dear Customer,
Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer
you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your boiler. Read the following pages carefully: you
will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will confirm your satisfaction for the Immergas product.
Contact our area authorised after-sales centre as soon as possible to request commissioning. Our technician will verify the correct functioning conditions; he
will perform the necessary calibrations and will demonstrate the correct use of the generator.
For assistance and scheduled maintenance contact Authorised Immergas After-Sales centres: they have original spare parts and are specifically trained directly
by the manufacturer.
General recommendations
All Immergas products are protected with suitable transport packaging.
The material must be stored in dry environments protected from bad weather.
The instruction book is an integral and essential part of the product and must also be given to the new user in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
This instructions manual provides technical information for installing Immergas products. As for the other issues related to the installation of products (e.g.
safety at the workplace, environmental protection, accident prevention), it is necessary to comply with the provisions of the standards in force and the principles
of good practice.
In compliance with the legislation in force, the systems must be designed by qualified professionals, within the dimensional limits established by the Law.
Installation and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by professionally
qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kit and devices can cause unexpected problems for people, animals
and objects. Read the instructions provided with the product carefully to ensure proper installation.
Maintenance must be carried out by skilled technical staff. The Immergas Authorised After-sales Service represents a guarantee of qualifications and
professionalism.
The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially
dangerous.
If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or instructions contained in
this book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damages and
the appliance warranty is invalidated.
For further information regarding legislative and statutory provisions relative to the installation of gas heat generators, consult the Immergas site at the
following web address: www.immergas.com
CE DECLARATION OF CONFORMITY
(according to ISO/IEC 17050-1)
The company IMMERGAS S.p.A., with registered office in via Cisa Ligure 95 42041 Brescello (RE), whose design, manufacturing and after-sales assistance
processes comply with the requirements of standard UNI EN ISO 9001:2008,
DECLARES that:
MAGIS PRO ERP hydronic units comply with the following European Directives and European Commission Delegated Regulations:
"Eco-design" Directive 2009/125/EC, "Energy labelling" Directive 2010/30/EC, EU Regulation 811/2013, EU Regulation 813/2013, "Electromagnetic
Compatibility" Directive 2004/108/EC, "Efficiency" Directive 92/42/EC and "Low-Voltage" Directive 2006/95/EC.
Mauro Guareschi
Research & Development Director
Signature:
Immergas S.p.A. declines all liability due to printing or transcription errors, reserving the right to make any modifications to its technical and commercial
documents without prior notice.