Heat Regulation Setting - Immergas MAGIS PRO ERP Instruction And Recommendation Booklet

1.10 HEAT REGULATION SETTING.

By setting the parameters in the "Heat regulation"
menu, you can adjust how the system operates.
The curves (Fig. 1-8) show the default settings in
the various operating modes available both with
external probe and without.
Zone 1 flow temperature in central heating mode, with
external probe
R04
R05
R02
Zone 1 flow temperature in cooling mode, with exter-
nal probe
R13
R12
R11
Flow temperature in central heating mode without
external probe
Set Risc
U01
Key:
Rxx - "Heat regulation" menu parameter
TE - Outdoor temperature
TM - Flow temperature
U01 - Zone 2 flow temperature in "User" menu central
heating mode
1-8
U03
R03
U05
R10
Z1
Z2
Zone 2 mixed flow temperature in central heating
mode, with external probe
R08
R09
R06
Zone 2 mixed flow temperature in cooling mode, with
R17
R16
R15
Flow temperature in cooling mode without external
U02
Set Ra resc
U02 - Zone 2 flow temperature in "User" menu cooling
mode
U03÷06 - Offset value compared to the curve set by the
external probe
Zx - Heating system zone
10
U04
R07
external probe
U06
R14
probe
Z2
Z1