Chapter 3: Installing The Inverter; Inverter Package Contents; Identifying The Inverter - SolarEdge StorEdge Installation Manual

Chapter 3: Installing the Inverter

Install the inverter either before or after the modules and power optimizers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.

Inverter Package Contents

One StorEdge inverter
One mounting bracket
Two Allen screws for fastening the inverter to the mounting bracket
Installation guide
Two 48 mm ferrite beads
One 39 mm ferrite bead
Lugs and M8 screws for connecting battery cables on the inverter side
Heat-shrink tubing

Identifying the Inverter

Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the SolarEdge monitoring platform.
StorEdge Three Phase Inverter Installation Guide MAN-01-00648-1.1
Chapter 3: Installing the Inverter 19