Inverter Transport And Storage - SolarEdge StorEdge Installation Manual

12 Inverter Transport and Storage
For CAN
Six-wire shielded twisted pair cable with RJ45 connector
CAT5/6 twisted pair Ethernet cable with RJ45 connector
For connecting the battery to the inverter, use copper cables with the following
parameters:
Maximum length: 5m
Cross-section area: 35 or 50 mm
Crimping tools
Shrinking tools

Inverter Transport and Storage

Transport the inverter in its original packaging, facing up and without exposing it to
unnecessary shocks. If the original package is no longer available, use a similar box that
can withstand the weight of the inverter (refer to the inverter weight in the specification
datasheet provided with the unit), has a handle system and can be closed fully.
Store the inverter in a dry place where ambient temperatures are -25°C to +65°C /
-13°F to 149°F.
2
StorEdge Three Phase Inverter Installation Guide MAN-01-00648-1.1