Chapter 1: Overview; The Storedge Solution Components - SolarEdge StorEdge Installation Manual

Three phase inverter with setapp configuration

Hide thumbs Also See for StorEdge:

Table of Contents

Chapter 1: Overview

SolarEdge's StorEdge™ solution for Smart Energy Management, enables connecting a

battery to the inverter.

Power is stored in the battery and can be used for various applications such as

maximized self-consumption and time of use profile programming. For backup power,

an inverter specifically designed for backup applications is required; this inverter is not

in the scope of this document.

StorEdge Inverter is connected to a battery and supplies control and monitoring

signals to the battery for operation, in addition to its traditional functionality as a

DC-optimized PV inverter.

Energy Meter - The meter is used by the inverter for export/ consumption readings,

and for Smart Energy Management applications, such as: export limitation, and

maximizing self-consumption.

Battery - A 48V battery designed to work with the StorEdge system. Make sure to

use SolarEdge-approved batteries only.

Figure 1: StorEdge system components

StorEdge Three Phase Inverter Installation Guide MAN-01-00648-1.1

Table of Contents

Chapter 1: Overview