Related Manuals for THOMSON DPL580HT
Summary of Contents for THOMSON DPL580HT
- Page 1 B_DPL580 4/16/04 12:52 PM Page 2 THOMSON 46, quai Alphonse Le Gallo 92648 Boulogne Cedex FRANCE 5587059A www.thomson.net...
- Page 2 B_DPL580 4/16/04 12:52 PM Page 3 u s e r m a n u a l DPL580HT It is important to read this instruction book prior to using your new product for the first time.
-
Page 3: Safety Information
B_DPL580 4/16/04 12:52 PM Page 4 Safety Information Rating Information: At bottom / back of the unit this unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetic compatibility. -
Page 4: Table Of Contents
B_DPL580 4/16/04 12:52 PM Page 5 Table of Content Safety Information Getting Started Unpacking the Receiver ... . .2 Unpacking the Speakers ... . .2 Inserting Batteries into Remote Control .3 Set Up and Maintenance of the Receiver . -
Page 5: Getting Started
B_DPL580 4/16/04 12:52 PM Page 6 Getting Started Unpacking the Receiver You should receive the following items: ON/ECO One receiver unit One pig-tail antenna wire • one instruction book; Th oms o n • Thomson Warranty Card; Wa rr an ty Ca rd •... -
Page 6: Inserting Batteries Into Remote Control
B_DPL580 4/16/04 12:52 PM Page 7 Inserting Batteries into Remote Control Insert two “AAA” (R03) batteries according to the + and - signs in the battery compartment. To use the remote control, point it directly at your receiver. Install batteries as follows: 1. -
Page 7: Connecting To Audio-Visual Components
B_DPL580 4/16/04 12:52 PM Page 8 Getting Started Connecting to Audio-Visual Components to VIDEO OUT (DVD) to AUDIO OUT (DVD) to AUDIO OUT (SAT) to VIDEO OUT (SAT) DIGITAL CONNECTION If you have a SAT receiver DVD player or CD player with a digital output, you can make use of an optical digital cable (not supplied) or coaxial digital cable (not supplied) to carry the audio portion of the signal and enjoy Dolby Digital sound quality. -
Page 8: B_Dpl580 En 4/16/04 12:52 Pm
B_DPL580 4/16/04 12:52 PM Page 9 Digital Connections Read instructions carefully when connecting components to the receiver. Digital In Jacks can accept Dolby Digital (AC-3) or PCM signals when compatible components are connected. OPTICAL DIGITAL IN (AUDIO) Optical Fiber Cable Connect to optical digital output of DVD, CD, SAT or other compatible devices. -
Page 9: Connecting The Speakers
B_DPL580 4/16/04 12:52 PM Page 10 Getting Started Connecting the Speakers Speakers There are 6 speakers equipped with the unit (2 front, 1 center, 2 rear, 1 subwoofer). In order to enjoy good surround effects, all six speakers need to be connected to the receiver. -
Page 10: Positioning Your Speaker
B_DPL580 4/16/04 12:52 PM Page 11 Positioning your speaker 1 Left, Right (Front Speakers) They carry primarily music and sound effects 2 Center In surround mode, the center speaker carries much of the dialogue as well as music and effects. It should be set between the left and right speakers. -
Page 11: Preferred Surround Placement
B_DPL580 4/16/04 12:52 PM Page 12 Getting Started Preferred surround placement Location If possible, place surround speakers to either side of the listening area, not behind it. Courtesy Dolby Laboratories Height If space permits, install surrounds 2-3 feet above viewers. This helps to minimize localization effects. Courtesy Dolby Laboratories Aiming Aiming surrounds straight across the room, not down at... -
Page 12: Test Tone / Channel Balance
B_DPL580 4/16/04 12:52 PM Page 13 Test Tone / Channel balance Channel balance Your receiver is equipped with a test signal generator for balancing the channels. As the signal "travels" from channel to channel, adjust the level controls until each channel plays at the same loudness level. -
Page 13: Operating Your Receiver
B_DPL580 4/16/04 12:53 PM Page 14 Operating Your Receiver Receiver Controls ON/ECO 1. ON/ECO Turns the unit on and off. When the system is turned on, the unit will go to the mode it was in before powered off. 2. Display Displays current status of the receiver. -
Page 14: Your Remote Control
B_DPL580 4/16/04 12:53 PM Page 15 Remote Control Please be sure you have inserted the batteries into the remote control (see relevant section on page 3.) You can test it by pressing any button. 1. ON•OFF Turns the receiver and other auxiliary components on and off. (see page 14 “Using the Remote to Control Additional Components”). -
Page 15: Display
B_DPL580 4/16/04 12:53 PM Page 16 Operating Your Receiver Display DVD / VCR / SAT / TUNER / TAPE / CD / TV • An arrow points to the current source mode. • Dolby Digital audio input for signal format. •... -
Page 16: Switching On/Off
B_DPL580 4/16/04 12:53 PM Page 17 Switching the unit on and off • To switch on the receiver, press the ON/ECO button on the main unit once, or the remote control. • Standby: when the receiver is in tuner mode, press the ON/ECO button once to enter standby mode. -
Page 17: Using The Remote To Control Additional Components
B_DPL580 4/16/04 12:53 PM Page 18 Operating your Receiver You can connect up to 6 audio/video sources to this amplifier: Source button Corresponding connector (receiver front panel) (receiver back panel) - DVD DVD IN (audio / video) - SAT SAT IN (audio / video) - TV TV IN (audio only) - VCR... -
Page 18: Using The Receiver To Play A Source
B_DPL580 4/16/04 12:53 PM Page 19 Using the receiver to play a source After having properly connected a source (DVD, CD, VCR) to the receiver, you can partly control them through the receiver. Playing a DVD with the receiver 1. Connect a DVD player to the receiver (see connecting your receiver for details). -
Page 19: Operating The Radio
B_DPL580 4/16/04 12:53 PM Page 20 Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows for AM/FM radio function. Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. -
Page 20: Storing Radio Stations
B_DPL580 4/16/04 12:53 PM Page 21 Storing radio stations The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio stations automatically in an ascending order. Automatic preset storing : (FM only) 1. - Page 21 B_DPL580 4/16/04 12:53 PM Page 22 Operating your Receiver RDS (Radio Data System) for FM Only The RDS icon shows on display when RDS data are received. The following information may be available on certain stations: • Frequency station, • Station name, •...
-
Page 22: Advanced Sound Control
B_DPL580 4/16/04 12:53 PM Page 23 Sound Enhancement Systems This receiver is equipped with several built-in sound enhancement systems. Dolby Digital The Dolby Digital mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides better sound quality and more powerful presence than conventional Dolby Surround. -
Page 23: Night Mode
B_DPL580 4/16/04 12:53 PM Page 24 Advanced Sound Control Dolby 3 Stereo The 3 Stereo mode will redirect the Surround signals to the front left and right speakers when only the front and center speakers are used. Front Left Speaker Center Speaker Listening Zone... -
Page 24: Fine Setting Of Components
B_DPL580 4/16/04 12:53 PM Page 25 Fine Setting of the Components The receiver can be directly turned on by pressing the DVD•6CH / SAT•CABLE / TV / CD•TAPE / VCR / TUNER buttons on the remote control, which also selects the best surround sound mode. -
Page 25: Fine Setting Of The Speakers
B_DPL580 4/16/04 12:53 PM Page 26 Advanced Sound Control Fine Setting of the Speakers All the basic settings have already been pre-set for the speakers included in the box. Also, to make the surround sound more effective and suit the acoustic conditions in your listening room, you may need to delay the signal coming from some of the speakers. - Page 26 B_DPL580 4/16/04 12:53 PM Page 27 Speaker Configurations You can also change the setup of the speakers. Use a subwoofer to enjoy optimum sound. • Speaker distance: For optimum surround experience measure the distance between the speaker and your favorite listening position. 1.
-
Page 27: Troubleshooting Tips
B_DPL580 4/16/04 12:53 PM Page 28 Troubleshooting Tips Troubleshooting Tips Receiver/Tuner Operation ST indicator is off. • Adjust the antenna. • Press GO BACK/ST.MONO button to insure you are not outputting in mono. The signal is Mono. Severe hum or noise. •... -
Page 28: Care And Maintenance
B_DPL580 4/16/04 12:53 PM Page 29 Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. Important battery information • Remove the batteries to avoid leakage if you do not use your remote control for more than one month.