Page 1
50 Ft. String Lights with Metal Cages Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #56958 READ & SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 6 Grounding .............................. 7 Extension Cords ............................ 8 Main Parts of Light Set ......................... 9 Assembly Instructions .......................... 9 Before Each Use ..........................10 Operating Instructions ........................
Intended Use Strongway 50 Ft. String Lights with Metal Cages are a single solution for illuminating your garage, driveway, barn, or anywhere else you need a long string of continuous light. The 125V, 15 Amp, 12/3 cord with a grounded plug features a metal lamp holder spaced every 10 feet along down the string.
Page 5
Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted.
the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING Electrical Shock and Fire Hazard. Do not exceed the marked lamp holder wattage or string maximum wattage including any additional string loads.
Use plug cover when not in use. Not for use by or around children. Grounding ⚠WARNING This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug.
Extension Cords ⚠WARNING USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating.
Main Parts of Light Set Reference Subassembly 50 Foot String Light Set Metal Lamp Guards Assembly Instructions ⚠WARNING This light set must be used with the lamp guards installed. Make sure the power is turned off. There is a risk of accidental starting, resulting in serious personal injury. Deviation from the assembly instructions may result in a risk of fire or electric shock.
Repeat the process to assemble 5 string lights. Note: Insert the bulb (not included) before or after assembling the guard. Before Each Use ⚠WARNING The light string must be supported every 10 feet. Do not use the conductors to support the light set.
Electric shock hazard. Do not use with an extension cord near water or where water may accumulate. Do not use in wet or damp areas. Electric shock hazard. Do not use while standing on wet or damp areas. ...
Maintenance ⚠WARNING If the supply cord of this light is damaged, it must be replaced only by a qualified service technician. Procedures not specifically explained in this manual must be performed only by a qualified technician. Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures.
the contacts on each end of bulb. Bulb may have been damaged in shipment. Bulb is damaged. Check lamp with another bulb or check bulb with a continuity tester. If bad, replace bulb. Parts Diagram Parts List Reference Part Description Quantity Power Cord, Plug, Outlet, and Socket Metal Guard...
Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 15
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 15 of 15...