Table of Contents
Advertisement
........................................................ 3
........................................................... 4
................................................................................. 4
................................................................ 5
channels...................................................................... 5
.......................................................................... 5
receiver)...................................................... 5
Preparations.......................................................... 6
installation.................................................................... 6
Cleaning....................................................................................... 6
Maintenance................................................................................ 7
delivery................................................................7
........................................................................... 7
Connections........................................................... 8
Connections.........................................................................8
connection....................................................................... 9
Operation............................................................. 10
.............................................................................10
............................................................................... 10
control......................................................................... 10
.............................................................. 10
..................................................13
..............................................................12
...........................................................................13
...................................................................... 13
..................................................................... 13
mode................................................................................ 13
....................................................................... 13
configuration.................................................................... 13
automatically.............................................. 14
................................................. 4
30LB020S4.................... 4
supply.................................. 4
control............................. 5
........................... 5
............................ 5
....................................6
................................................ 6
......................7
speakers........................................ 7
............................................... 8
unit.......................... 8
...................................................... 9
..................................................... 9
equipment.............................. 9
..........11
tuning.......................................... 14
.................................................................... 15
settings............................................................ 16
settings........................................................ 16
decoder............................................... 17
......................................................... 17
sound......................................................... 17
functions..............................................................19
......................................................... 19
.............................................................. 19
Timer.......................................................................................... 19
........................................................................ 20
PIC (Picture in computer) ...................................................... 20
status..................................................... 21
............................................................................21
inputs........................................................................ 21
..............................................................................22
signals......................................................................... 22
...................................................................... 22
.............................................................. 22
Favourite pages
........................................................................ 22
teletext................................................................ 23
functions........................................................... 24
equipment...........................................25
Auxiliary
equipment........................................................25
equipment........................................... 25
sockets...................................................................... 26
.....................................................................28
Contents
.......................................... 15
................................................ 15
Decoder..................... 17
Panorama................... 18
............ 21
sources....................................... 25
......................... 27
....................... 27
................................................... 27
En
1
Advertisement
Table of Contents
Related Manuals for THOMSON 15LB020S4
Summary of Contents for THOMSON 15LB020S4
-
Page 1: Table Of Contents
Specifications ... 3 Quick guide ... 4 Sockets on the rear of the unit ... 4 Mains power and speaker sockets 30LB020S4... 4 Connecting to the mains power supply... 4 Front of TV ... 4 Switching on the unit ... 5 Selecting TV mode on the remote control... - Page 2 Overview...
-
Page 3: Specifications
Specifications Model * 15LB020S4 General: Display Picture format Screen diagonal (38 cm) Picture resolution 1024 x 768 (XGA) Pixel pitch (mm) 0.300 x 0.300 Brightness 400 cd/m2 Contrast ratio 350:1 Channel memory 99 + 2 Tuner ** Tuning Audio Dolby Virtual... -
Page 4: Quick Guide
Designation Mains connection socket Speaker socket (left +, left -, right -, right +) Connecting to the mains power supply 15LB020S4, 20LB020S4, 23LB020S4 Plug the mains cable into Plug the mains cable into the power pack the mains socket on the... -
Page 5: Switching On The Unit
Switching on the unit Selecting TV mode on the remote control Switching the TV on and to standby mode Selecting channels Selecting inputs Select the input using arrow buttons Ÿ / ⁄. Press the OK button 24 to store the setting. Antenna (75 Ohm) AV 1 Signal input and output... -
Page 6: Preparations
Preparations Preparations Setting up, care and maintenance Place of installation Caution! Protect the television against humidity and rain. The TV set should not be operated in rooms with high moisture levels. Do not place receptacles containing water on the TV, e.g. vases, flower pots. The combination of electri- cal current and water can cause fatal electric shocks. -
Page 7: Maintenance
Maintenance Electronic components are subject to a natural ageing process. In the event of malfunctions, please consult a specialist dealer. Only use the original packaging for transporting the unit. Caution! The unit is operated at dangerous voltages. The unit may only be opened by an authorised specialist. All maintenance and servicing work must be carried out by an authorised company. -
Page 8: Connections
Item Designation 2 Headphone socket for connecting headphones with a 3.5 mm jack Connection elements on the rear of the unit 15LB020S4 Item Designation A DC IN: Connecting the external power pack (12 V DC) to the power supply B VGA IN: Connecting a PC via a VGA cable... -
Page 9: Antenna / Cable Connection
Caution! The LCD TV 30LB020S4 should only be connected to a power supply voltage of 230 V / 50 Hz with a protec- tive earth conductor. 15LB020S4, 20LB020S4, 23LB020S4 Connect mains cable to power pack Plug the cable on the... -
Page 10: Operation
Operation Operation Controls Front of TV Item Designation Remote control receiver and standby indicator Headphones socket Power switch Remote control If the equipment is operated with the remote control, observe the following: The supplied remote control can control up to five different devices: TV, VCR, DVD. -
Page 11: Using The Remote Control For Other Equipments
Using the remote control for other equipments The remote control supplied with your set can be used for other equipment, such as video recorders or DVD players. This page provides information concerning the remote control’s use with these types of equipment. Press the VCR button Press the DVD... -
Page 12: Initial Startup Procedure
Operation Initial startup procedure When setting up for the first time, proceed as follows: Switch the unit on at the power switch (3). Then press the button on the remote control. The standby indicator (1) goes out. The following Installation Menu appears on the screen the first time the unit is switched on, or before the first channel is stored: Note:... -
Page 13: Operation
Operation Switching on/off Actuate power switch (3) to activate standby mode. The standby indicator lights up (1) red. To switch on the device, press the button on the remote control. The standby indicator 1 goes out. Press the button on the remote control to turn the active unit to standby mode. -
Page 14: Storing Channels Automatically
Operation Storing channels automatically Open the Install. menu: Press MENU button. Select Install. in the Main menu using arrow buttons Ÿ / ⁄. / ÿ to move the green marker to the Press arrow button Install. menu. Select Search using arrow buttons Ÿ / ⁄. / ÿ... -
Page 15: Allocating And Deleting Channels
18. If the full channel name is set, quit the entry field using ar- / ÿ. row buttons 19. Select Tuner in the Source menu line for the aerial or cable system stations using the arrow buttons 20. Press the OK button to store the settings. 21. -
Page 16: Adjusting Tone Settings
Operation Adjusting tone settings Open the Sound menu: Press MENU button. Select Sound in the Main menu using arrow buttons Ÿ / ⁄. Press arrow button ÿ to move the green marker to the Sound menu. If a stereo signal is received, the option of changing be- tween stereo and mono reception is available in the Nor- mal sound menu item. -
Page 17: The Panorama Sound Decoder
The Panorama Sound decoder "Panorama Sound" achieves a significant improvement of the stereophonic sound with normal playback of stereo sound (2 channels left/right). The integrated microcomputer ensures that the sound has depth and is three-dimensional, even without additional amplifiers and speakers. -
Page 18: Dolby Virtual Surround Sound And Panorama
Operation Dolby Virtual Surround Sound and Panorama Open the Sound-2 menu: Press info button MENU. Select Sound-2 in the Main menu using arrow buttons Ÿ / ⁄. Use the right-hand arrow button ÿ to move the green marker to the Sound-2 menu for the selected decoder mode. -
Page 19: Special Functions
Special functions Fade-in display window The status line with channel position, channel names, sound mode and time is displayed by pressing the INFO button. Otherwise the display will fade out automatically after approx. 5 seconds. The time display only functions when a transmitter offers teletext. -
Page 20: Childproof Lock
Operation Childproof lock Open the Lock menu: Press MENU button. Select Lock in the Main menu using arrow buttons Ÿ / ⁄. Press arrow button ÿ to move the green marker to the Lock menu. Use arrow buttons Ÿ / ⁄ to select the individual menu items. -
Page 21: Resetting To Delivery Status
Resetting to delivery status Open the Reset menu: Press MENU button. Select Reset in the Main menu using arrow buttons Ÿ / ⁄. Press arrow button ÿ to move the green marker to the Re- set menu. PC mode Selecting inputs A PC can be connected to the device via VGA socket (B), or a PC or another digital signal source can be connected via DVI socket (C) (see section Connecting auxiliary equipment on... -
Page 22: Teletext
Operation Teletext Teletext signals... are not always transmitted for the whole duration of the broad- casting time by all programmers. A prerequisite for teletext is good reception. Fine tuning (see page 14) must be set accurately. If problems arise, however, the authorised dealer should check the antenna system. -
Page 23: Top / Flof Teletext
Use arrow buttons Ÿ / ⁄ to select the individual menu items. / ÿ to modify the relevant data. Use arrow buttons In the Program line, enter the number of the channel to which the favourite pages will be allocated. Name displays the relevant television station abbreviation automatically. -
Page 24: Other Teletext Functions
Operation Other teletext functions Press MENU button twice (with standard text press once) to dis- play information lines for other functions; Zoom, Reveal, Stop and CS01-07. Green Yellow Pressing the respective colour button carries out the relevant function. red button Zoom green button Reveal... -
Page 25: Auxiliary Equipment
Connect a video recorder, for example, to Scart socket E (Scart 1). AV signals (picture and sound) can be recorded and repro- duced via this socket. Scart socket D (23LB020S4, 30LB020S4) or F (15LB020S4, 20LB020S4) are only used to reproduce the AV signal. -
Page 26: Selecting Sockets
Auxiliary equipment RGB signal The RGB signal (red-green-blue colour signal), e.g. from a DVD player, digital SAT receiver or games console, can also be fed in using Scart socket E. For RGB output the horizontal picture position can also be ad- justed. -
Page 27: Additional Devices With Switching Voltage
Ÿ / ⁄. Select AV 1 output Auxiliary equipment / ÿ to set AV 2 (15LB020S4, Use the arrow buttons 20LB020S4) or AV 3 (23LB020S4, 30LB020S4) as the input signal. The copying procedure can now be started. -
Page 28: Index
Index Index AV signal 25 Batteries 10 Brightness 15 Burn-in images 7 Channel position settings 16 Channel search 13 Childproof lock 20 Cleaning 6 Clock 19 Connection External equipment 9 Connection Connection elements on the side of the unit 8 Connections 8 Antenna / cable connection 9 Connecting auxiliary equipment 25...