Advertisement
Quick Links
Advertisement
Related Manuals for Comtrend Corporation WAP-EN1200E
Summary of Contents for Comtrend Corporation WAP-EN1200E
- Page 1 Quick Installation Guide WAP-EN1200E| AC1200 In-Wall Wireless Access Point...
-
Page 2: Product Information
Product Information I-1. Package Contents 1. AC1200 In-Wall Wireless Access Point 2. Quick Installation Guide 3. Mounting Screws I-2. System Requirements 1. An existing cable/DSL modem & router. 2. A PoE Switch that supports 802.3af or 802.3at. 3. A computer with a Web browser for the Access Point configuration. - Page 3 I-3. Hardware Overview Reset Button RJ-45 Gigabit RJ-11 LAN Port Pass-Through Telephone Port RJ-11 Pass-Through Telephone Port LEDs RJ-45 Gigabit LAN Port I-4. LED Status LED Color Status Description The access point is on. Power Green (Right) Flashing The access point is starting up. Green LAN port is connected.
-
Page 4: Quick Setup
I-5. Reset If you experience problems with your access point, you can reset the device back to its factory settings. This will reset all settings back to default. 1. Press and hold the reset button on the access point for at least 10 seconds. Then release the button. - Page 5 3. Wait a moment for the access point to start up. The access point is ready when the power LED is Green. 4. Set your computer’s IP address to 192.168.2.x where x is a number in the range 3 – 100. DHCP is enabled on the access point by default.
- Page 6 7. You will arrive at the “System Information” screen shown below. 8. Follow the instructions below in II-2. Basic Settings to configure basic settings. II-2. Basic Settings The instructions below will help you configure the following basic settings of the access point: - LAN IP Address - 2.4GHz &...
- Page 7 1. To change the access point’s LAN IP address, go to “Network Settings” > “LAN-side IP Address” and you will see the screen below. 2. Enter the IP address settings you wish to use for your access point. You can use a dynamic (DHCP) or static IP address, depending on your network environment.
- Page 8 4. To configure the security of your access point’s 2.4GHz wireless network(s), go to “Wireless Setting” > “2.4GHz 11bgn” > “Security”. Select an “Authentication Method” and enter a “Pre-shared Key” or “Encryption Key” depending on your choice, then click “Apply”. If using multiple SSIDs, specify which SSID to configure using the “SSID”...
- Page 9 8. To set the correct time for your access point, go to “Management” > “Date and Time”. 9. Set the correct time and time zone for your access point using the drop down menus. The access point also supports NTP (Network Time Protocol) so alternatively you can enter the host name or IP address of a time server.
-
Page 10: Browser Based Configuration Interface
Browser Based Configuration Interface The browser-based configuration interface enables you to configure the access point’s advanced features. The access point features a range of advanced functions such as MAC filtering, MAC RADIUS authentication, VLAN configurations, up to 32 SSIDs and many more. To access the browser based configuration interface: 1. - Page 11 5. Use the menu across the top and down the left side to navigate. 6. Click “Apply” to save changes and reload the access point, or “Cancel” to cancel changes. Wait a few seconds for the access point to reload after you “Apply” changes.
- Page 12 Visit us.comtrend.com for the latest firmware and product documentation. For your convenience, a QR code can be scanned in the bottom of the page. FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage: http://us.comtrend.com/products/public/product/home-networking/wap-en1200e.html For more information: Facebook: https://facebook.com/Comtrend Website: http://us.comtrend.com/...
-
Page 13: Supplier's Declaration Of Conformity
Supplier’s Declaration of Conformity Company: Comtrend Corporation - North America Address: 14 Chrysler, Irvine, CA, 92618 Certify and declare under our responsibility that the following equipment: Product Name: AC1200 Managed Dual Band In-Wall Wireless Access Point Model Name: WAP-EN1200E Brand Name:... - Page 14 Federal Communication Commission Interference Statement This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.