Touchpad Button Board - HP 245 G7 Maintenance And Service Manual

TouchPad button board

Table 5-9 Spare part description and number
Description
TouchPad button board
TouchPad button board bracket
TouchPad button board cable
Before removing the TouchPad button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the TouchPad button board:
1. Disconnect the TouchPad ZIF cable from the TouchPad button board (1).
2. Disconnect the system board ZIF cable from the TouchPad button board (2).
3. Remove the two Phillips M2.0 × 2.0 screws (3) that secure the board to the computer.
4. Lift the bracket from on top of the TouchPad button board (4).
5. Remove the TouchPad button board from the computer (5).
Reverse this procedure to install the TouchPad button board.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
26).
27).
Component replacement procedures
Spare part number
L23197-001
L23193-001
L23185-001
39