Positioning The Heating Control Unit - Immergas ARES PRO 150 Instructions And Recommendations

3.3 POSITIONING THE HEATING
CONTROL UNIT
Special attention must be paid to local standards and regulations re-
garding heating control units, especially the minimum distances that
must be observed.
Installation must be comply with the requirements contained in the
most recent standards and legislation regarding heating control units,
heating system installation and hot water production, ventilation, flues
suitable for condensation boiler combustion product exhaust, and any
other applicable regulation.
Observe the minimum clearance distances required to
perform normal maintenance and cleaning operations.
Instructions for the installer
Follow the safety guidelines below when choosing the device's instal-
lation area:
- Place the device in an area protected against freezing.
- Do not install the device in corrosive or very dusty rooms.
MINIMUM MEASUREMENTS
ARES PRO
H8 (*)
150 2109
2147
230
2366
300
2690
348
2690
400
500 2690
600 2770
(*) Space with combustion chamber opening
21
H9
2300
2500
2500
3000
3000
3000
3000