Instructions For Installation; General Recommendations; Instructions For The Installer - Immergas ARES PRO 150 Instructions And Recommendations

3
INSTRUCTIONS FOR
INSTALLATION
3.1

GENERAL RECOMMENDATIONS

ATTENTION!
This boiler must only be employed for its explicitly
intended use. Any other use must be considered
improper and therefore dangerous.
This boiler is used to heat water to below boiling
temperature in atmospheric pressure.
Before connecting the boiler, have professionally
qualified personnel:
a) Accurately washing all of the pipes in the system to
remove any residues or sediments that could stop
the boiler from running efficiently.
b) Making sure the boiler is set up to operate with
the available type of fuel.
This is stated on the packaging and technical
characteristics plate;
c) Make sure that the chimney/flue has an adequate
draught, that it is not choked, and that there are
no other exhausts for other appliances, unless the
flue is designed for multiple utilities, in accordance
with standard specifications and requirements in
force. Only once this
can the fitting between boiler and chimney/flue be
set up;
check
has been carried out
19

Instructions for the installer

ATTENTION!
If the installation area has aggressive/corrosive pow-
ders and/or vapours, the device must be adequately
protected and must operate independently from the
air provided in the room.
IMPORTANT!
Assemble the appliance in observance of the mini-
mum required distances for installation and main-
tenance.
The boiler must be connected to a central heating
system and/or domestic hot water circuit, in com-
pliance with its performance and capacity.