Removing Ejector Handle Labels - HP 744 Owner's Manual

Installing Accessories
PMC Bridge Adapter and Expansion Adapter
13 If you have installed a PMC expansion adapter, resulting in a three board
assembly, we recommend that you install the ejector handle sleeves in-
cluded in your kit. The procedure is as follows:
a Remove the logo and model labels from the ejector handles on your
board computer, as shown in Figure 2-10.
Model label
Logo label
Figure 2-10

Removing Ejector Handle Labels

2-19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com