4 Remove the copper EMI gasketing from the front panel of the board com-
puter.
5 Install the PMC bridge adapter onto the board computer as shown in Fig-
ure 2-6. There are four screws that secure the front bezel, and four screws
that secure the VME connectors.
PMC Bridge Adapter
with 2 PMC Cards Installed
Front Bezel Screws (4)
Figure 2-6
Installing the PMC Bridge Adapter onto the Board Computer
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PMC Bridge Adapter and Expansion Adapter
Installing Accessories
Connector
Screws (4)
2-15