Ricoh PB3040 Installation Manual

Paper Feed Unit PB3040/LCIT PB3050
(Code: D351, D352)
For Machine Code: G179
INSTALLATION GUIDE
R CAUTION:
For service personnel only (D009, D011,
D012, D013)
When installing the Paper Feed Unit, follow
the installation procedure in the service
manual.
Attaching the Paper Feed Unit
This section describes how to attach
the 1000-sheet paper feed unit or
2000-sheet paper feed unit to the
printer. The procedure is the same for
both units. The 1000-sheet paper feed
unit is used as an example.
R CAUTION:
• The printer weights approxi-
mately 73 kg (161 lb.).
• Four or more people are re-
quired to move the printer. Hold
the handles located on both
sides, and then lift it slowly. Lift-
ing it carelessly or dropping it
may cause an injury.
• It is dangerous to handle the
plug with wet hands. Doing this
may result in receiving an elec-
tric shock.
• Before moving the machine, un-
plug the power cord from the out-
let. If the cord is unplugged
abruptly, it could become dam-
aged. Damaged plugs or cords
can cause an electrical or fire
hazard.
Important
❒ When attaching multiple options,
attach the paper feed unit first.
❒ Either the 1000-sheet paper feed
unit or 2000-sheet paper feed unit
can be attached, but not both.
❒ When the 1000-sheet paper feed
unit or the 2000-sheet paper feed
unit is attached, you can also at-
tach the 1200-sheet paper feed
unit. To attach the 1200-sheet pa-
per feed unit, contact your sales or
service representative.
❒ Before using the new paper feed
unit, you must configure settings
in the printer driver.
A
Check the contents of the package.
For 1000-sheet paper feed unit:
BEK501S
1