Heat Sink Assembly - HP 14-dk0 Series Maintenance And Service Manual

Heat sink assembly

NOTE: The heat sink assembly spare part kit includes replacement thermal materials.
Table 5-16 Heat sink assembly description and part number
Description
Heat sink assembly, discrete (includes replacement thermal materials)
For use in models with the following processors: A9-9425, A6-9225, A4-9125
For use in models with the following processors: Ryzen7-3700U, Ryzen5-3500U, Ryzen3-3200U, Athlon
300U
Heat sink assembly, UMA (includes replacement thermal materials)
For use in models with the following processors: A9-9425, A6-9225, A4-9125
For use in models with the following processors: Ryzen7-3700U, Ryzen5-3500U, Ryzen3-3200U, Athlon
300U
Before removing the heat sink assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the heat sink assembly:
1. If you have a model with discrete graphics:
a. In the order indicated on the heat sink, remove the six Phillips M2.0 × 4.0 screws (1) that secure the
heat sink to the system board.
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 35).
31).
33).
Component replacement procedures
Spare part number
L23386-001
L23192-001
L23385-001
L23191-001
31).
53