Power connector
Table 5-10
Power connector description and part number
Description
Power connector
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
5.
Remove the right hinge screw and lift the right hinge (see
To remove the power connector:
1.
Disconnect the power connector cable (1) from the system board.
2.
Lift the power connector (2) to remove it.
Reverse this procedure to install the power connector.
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page
35).
31).
33).
Display assembly on page
Component replacement procedures
Spare part number
L23188-001
31).
56).
45