Table of Contents
Advertisement
System board
NOTE:
The system board spare part kit includes a solid state drive, thermal material, heatsink, and adhesive
cover for the system board and battery.
Description
i5-7Y54 (1.0 GHz, turbo to 3.2 GHz), 8 GB 1866 MHz L3, Dual, HDCP (includes 65536 MB eMMC SSD)
M3-7Y30 (1.0 GHz), 8 GB 1866 MHz L3, Dual, HDCP (includes 65536 MB eMMC SSD)
M3-7Y30 (1.0 GHz), 8 GB 1866 MHz L3, Dual, HDCP (includes 32786 MB eMMC SSD)
M3-7Y30 (1.0 GHz), 4 GB 1866 MHz L3, Dual, HDCP (includes 32786 MB eMMC SSD)
Pentium 4415Y (includes 32786 MB eMMC SSD)
IMPORTANT:
and replacement.
Before removing the system board, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
component:
a.
Battery (see
b.
Left speaker(see
Disconnect the system board cables:
1.
POGO board cable (1).
2.
USB board cable (2).
3.
Volume button board cable (3).
4.
Power button board cable (4).
5.
Front webcam cable (5).
6.
Front microphone cable (6).
7.
Rear microphone cable (7).
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
Left speaker on page
24).
38).
Spare part number
L32397-001
L20788-001
L20787-001
L17088-001
L17087-001
20), and then remove the following
Component replacement procedures
39
Advertisement
Table of Contents
