Table of Contents
Advertisement
Rear microphone module
Description
Rear microphone module
IMPORTANT:
and replacement.
Before removing the rear microphone module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
component:
▲
Battery (see
Remove the rear microphone module:
1.
Release the microphone cable from the ZIF connector on the system board (1).
2.
Remove the rear microphone module from the base enclosure (2).
Reverse this procedure to install the rear microphone module.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
24).
Spare part number
xxxxxx-001
20), and then remove the following
Advertisement
Table of Contents
