Table of Contents
Advertisement
Front microphone module
NOTE:
The front microphone module spare part kit includes the microphone cable.
Description
Front microphone module
IMPORTANT:
and replacement.
Before removing the front microphone module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
components:
▲
Battery (see
Remove the front microphone module:
1.
Release the microphone cable from the ZIF connector on the system board (1).
2.
Release the front microphone cable from the adhesive that secures it to the base enclosure (2).
3.
Remove the front microphone module from the base enclosure (3).
Reverse this procedure to install the front microphone.
34
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
24).
Spare part number
L17077-001
20), and then remove the following
Advertisement
Table of Contents
