Table of Contents
Advertisement
Reverse this procedure to install the power button board.
Right speaker
Description
speaker, right
IMPORTANT:
and replacement.
Before removing the right speaker, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel (see
components:
▲
Battery (see
Remove the right speaker:
1.
Release the speaker cable from the USB board (1).
2.
Remove the two Phillips M2.0 × 3.0 screws (2) that secure the speaker to the base enclosure.
3.
Remove the speaker(3).
4.
Detach and replace the volume button board and volume button board cable from the right speaker (1)
before completely removing the speaker from the computer.
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
24).
Spare part number
xxxxxx-001
20), and then remove the following
Component replacement procedures
27
Advertisement
Table of Contents
