Table of Contents
Advertisement
Quick Links
Brought to You by Augusta Flint
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 MISSION OAKS BLVD., CAMARILLO, CA 93011
VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM
©
Copyright
2004 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
MOTOR - 3 HP
MOTOR - 3 HP
MOTOR - 3 HP
MOTOR - 3 HP
MOTOR - 3 HP
07570
®
. All rights reserved. No portion of this
REV 08/05
Advertisement
Table of Contents
Related Manuals for Chicago Electric 07570
Summary of Contents for Chicago Electric 07570
- Page 1 MOTOR - 3 HP MOTOR - 3 HP MOTOR - 3 HP MOTOR - 3 HP 07570 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM...
-
Page 2: Specifications
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. REV 01/05 REV 08/05 SKU 07570 Page 2 For technical questions, please call 1-800-444-3353. -
Page 3: Personal Safety
Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. SKU 07570 Page 3 For technical questions, please call 1-800-444-3353. - Page 4 National Electric Code, NEMA Standard Publication No. MG2, and local codes. Ground frames in accordance with NEC Article 430. For general grounding information, refer to NEC Article 250. SKU 07570 Page 4 For technical questions, please call 1-800-444-3353.
-
Page 5: Power Cords
Protect your power cords from sharp objects, excessive heat, and damp or wet areas. SYMBOLOGY l l u Table B n i l s t l SKU 07570 Page 5 For technical questions, please call 1-800-444-3353. -
Page 6: Installation
The other 2 wires must be connected to the other two terminals, one on each terminal. The power supply is 230 VAC, meaning that both wire leads are “Hot” with 115 Volts of current each. Wiring Diagram Line 208~230V Supply Line Line SKU 07570 Page 6 For technical questions, please call 1-800-444-3353. -
Page 7: Inspection, Maintenance, And Cleaning
Re-oil sleeve bearings with drops of 5W20 viscosity motor oil every 2000 hours of normal service. Direct drive operation (no pulleys) requires lubrication every 3000 hours of normal service. Sealed ball bearings require no attention during the life of the bearing. REV 01/05 SKU 07570 Page 7 For technical questions, please call 1-800-444-3353. -
Page 8: Assembly Diagram
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 06/05 SKU 07570 Page 8 For technical questions, please call 1-800-444-3353.