Advertisement
STATE ON-DEMAND
GAS WATER HEATERS.
The durability of State.
The convenience of continuous flow delivery.
On-demand, or tankless, technology is not
new. It's been in existence for about 30 years
in other parts of the world. Now State com-
bines this efficient technology with our rep-
utation for durability and rugged perform-
ance to bring a line of residential and com-
mercial tankless heaters to America.
State's on-demand water heaters use a
high-fire burner to quickly raise the tem-
perature of water passing through a cop-
per heat exchanger. Only after the heater
senses the demand for hot water does the
burner initiate its ignition sequence,
ignite and begin to heat the flow of water.
Product Features:
Style
• Durable powder coated finish
• Smooth, pleasant lines and rounded corners
• Matching pipe cover available for finished appearance
Technology
• Interior and exterior installation options
• Continuous hot water on demand (up to 9.8 GPM)
• Whole house water heating solution
• Direct electronic ignition – no pilot light
• On-board diagnostics and safety monitoring
• Applicable for residential hydronic
heating applications
All State on-demand heaters are gas-fired.
And because the burner is not ignited
until there is a demand for hot water,
they're highly energy efficient.
Remember: on-demand water heaters are
designed for specific usage situations.
Consult your sales rep or contact State at
800-365-0024 for specifications and recom-
mendations regarding all State storage and
on-demand product applications.
Durability
• Durable enough for 12-year limited warranty
on heat exchanger, 5-year warranty on all parts
• Tough enough to deliver endless hot water
• Durable enough to be installed outdoors,
saving valuable indoor square footage
Tankless Energy Efficiency
• Up to 84% thermal efficiency providing significant
energy cost savings
Choose from 16 different interior
and exterior models designed
specifically for Residential
or Commercial applications.
Commercial
Application Features:
• Hot water capacity of 0.6 – 9.8 GPM
• Min. – Max. input: 19,000 – 237,000 BTU
• Max. temperature: 185°F with Commercial Controller
• Ideal for restaurants, multifamily housing, schools, hotels,
hair salons and spas, laundromats and car washes
• ASME models available
Advertisement
