Advertisement
About the Algo SIP 8189 SIP Surface Mount Speaker
The 8189 Surface Mount Speaker is a SIP compliant and multicast capable IP speaker suitable for
voice paging, notification, and background music.
The 6.5" (165mm) coaxial speaker is G.722 wideband capable and music capable using a fullband
codec. An integrated microphone provides talkback capability and ambient noise detection for
automatic level control.
Dual SIP extensions provide both voice paging and notification (ring) capability. One or both
extensions can be registered with any Communication Server (hosted or enterprise) that supports
3rd party SIP Endpoints.
Multiple speakers in a SIP environment require only one speaker to register as a SIP extension.
Multicasting capabilities allow the SIP registered speaker to page and simultaneously stream
multicast audio to the other speakers.
The 8189 is configured using central provisioning features or by accessing a web interface using
browsers such as Google Chrome, Firefox, or Internet Explorer.
Note: The 8189 SIP Surface Mount Speaker harbours the same feature set as the 8188
SIP Ceiling Speaker. Therefore, the 8188 User Guide may be used for configuring the 8189.
For 8189 installation details, please follow the steps outlined in this document.
What is Included
[Sidebars are great for calling out important points from your text or adding
8189 SIP Surface Mount Speaker
additional info for quick reference, such as a schedule.
White trim ring and speaker grill
Tool for grill removal and reset
They are typically placed on the left, right, top or bottom of the page. But you
Pluggable terminal block for relay input and output
Getting Started Sheet
can easily drag them to any position you prefer.
What is not Included
When you're ready to add your content, just click here and start typing.]
Optional 1202 Call Button or 1203 Wall Switch
Screws for mounting the back box to ceiling
The full 8188 User Guide (www.algosolutions.com/8188/guide)
Getting Started - Quick Install & Test
This guide provides important safety information which should be read thoroughly before
permanently installing the adapter.
1.
Connect the 8189 SIP Surface Mount Speaker to an IEEE 802.3af compliant PoE network switch.
The blue light will remain on until boot up is completed – about 30 seconds.
2.
After the blue light turns off, press the reset switch (RST) that is hidden behind the speaker grill, to
hear the IP address over the speaker. The IP address may also be discovered by downloading the
Algo locator tool to find Algo devices on your network:
3.
Mount the speaker per the instructions in this guide.
Document 90-00084B
2017-09-08
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com/locator
support@algosolutions.com
(604) 454-3792
Advertisement
