Speaker Assembly - HP 14 Series Maintenance And Service Manual

Speaker assembly

Table 5-14 Speaker assembly description and part number
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan (see
5. Remove the heat sink (see
Remove the speakers:
1. Disconnect the antennas from the WLAN module (1), and the remove the antenna cables from the
channel in the left speaker (2).
2. Disconnect the speaker cable from the system board (1).
3. Remove the three Phillips M2.0 × 3.0 screws (2) that secure the speakers to the computer.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Fan on page 39).
Heat sink (thermal module) on page
26).
27).
41).
Spare part number
L64893-001