Heat sink (thermal module)
Table 5-11
Heat sink assembly, thermal pad, and thermal grease descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the heat sink:
1.
Models with a fan: Remove the four Phillips M2.0 × 2.5 screws (1) in the order indicated on the heat
sink.
2.
Remove the heat sink (2).
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
26).
27).
Component replacement procedures
Spare part number
L64890-001
41