Vent Cover (Interior) On Fanless Models - HP 14 Series Maintenance And Service Manual

Vent cover (interior) on fanless models

Table 5-10 Vent cover description and part number
Description
Vent cover
Fanless models require that you install a cover on the inside of the computer over the air vent holes.
IMPORTANT:
problems.
Before installing the interior vent cover, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Install the interior vent cover:
1. Fold the cover along the dotted lines in the middle of the cover.
2. Install the cover of the fan vent, making sure the cover aligns correctly with the hooks along the top of
the vent.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Do not install the vent cover in models with a fan. Doing so will cause thermal performance
Bottom cover on page
Battery on page
(Preparation for disassembly on page
27).
29).
Spare part number
L68313-001
26).