Touchpad - HP 14 Series Maintenance And Service Manual

Touchpad

Table 5-7 Touchpad description and part number
Description
Touchpad, natural silver
Touchpad, ash silver
Touchpad, snowflake white
NOTE: The touchpad spare part kit does not include the cable. The cable is available as spare part
number L64900-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the touchpad bracket to the computer, and
then remove the bracket (3).
3. Lift the tape that covers the screws on the top of the touchpad (4).
4. Remove the four Phillips M2.0 × 2.0 screws (5) that secure the touchpad to the computer, and then
remove the touchpad (6).
Reverse this procedure to install the touchpad.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
26).
27).
Component replacement procedures
Spare part number
L64897-001
L64898-001
L64899-001
37