Solid-State Drive - HP 14 Series Maintenance And Service Manual

Solid-state drive

Table 5-4 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, Gen 3 × 4, TLC
512 GB, PCIe, value
256 GB, PCIe, value
128 GB, SATA-3, TLC
64 GB, eMMC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the solid-state drive:
▲ Remove the Phillips M2.0 × 2.5 screw (1), and then pull the drive from the socket (2).
Reverse this procedure to install the solid-state drive.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
26).
27).
Spare part number
L72365-001
L61960-001
L61959-001
L61958-001
L61957-001