Information For The Operator; General Information - Siemens SIPART PS2 6DR5020 Series Manual

Information for the Operator

0.1

General information

SIPART PS2 Manual
A5E00074631-01
Dear customer,
Please read this manual before starting work!
It contains important information and data which, when observed,
ensure full availability of the equipment and save service costs. This
simplifies handling of this control instrument considerably and provides
accurate measuring results.
You have purchased an instrument which can be installed in various
configurations:
- SIPART PS2 without Ex-protection in a metal-- or plastic housing.
- SIPART PS2 with EEx ia/ib-protection in a metal-- or plastic
housing.
- SIPART PS2 EEx d in a pressurized explosion proof metal housing
This manual takes each of these possibilities into consideration. Any
differences between the devices are indicated specially.
Scope of delivery, see chapter 7, page 105.
The product described in this manual left the factory in a perfectly safe
and tested condition. To maintain this condition and to achieve perfect
and reliable operation of this product, it must only be used in the way
described by the manufacturer. Successful and safe operation of this
equipment is dependent on proper handling, installation, operation and
maintenance.
This manual contains the information required for use as intended of
the product it describes. It is addressed to technically qualified
personnel specially trained or having relevant knowledge of instrumen-
tation and control technology, hereafter called automation technology.
Familiarity with and proper technical observance of the safety notes
and warnings contained in this manual are essential for safe installation
and commissioning and for safety in operation and maintenance of the
product described. Only qualified personnel as defined in Chapter 0.3
has the necessary specialist knowledge to interpret the general safety
notes and warnings given in this document in specific cases and to
take the necessary action.
The documentation supplied with the instrument is listed in Chapter
0.5.
Information for the Operator
0
5