Table of Contents
Advertisement
1.
2.
Tablets without keyboards:
●
1.
2.
2.
Select Security, make the selection for Hard Drive Utilities, select DriveLock/Automatic DriveLock,
and then press enter.
3.
Select the hard drive you want to protect, and then press enter.
4.
Select Set DriveLock Master Password, and then press enter.
5.
Carefully read the warning.
6.
Follow the on-screen instructions to set a DriveLock master password.
NOTE:
Setup. For more information, see
on page
7.
To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then
select Yes.
NOTE:
Enabling DriveLock and setting a DriveLock user password
To enable DriveLock, and set a DriveLock user password, follow these steps:
1.
Start Computer Setup.
Computers or tablets with keyboards:
●
1.
2.
Tablets without keyboards:
●
1.
2.
2.
Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press
enter.
3.
Select the hard drive you want to protect, and then press enter.
4.
Select Enable DriveLock and then press enter.
5.
Carefully read the warning.
6.
Follow the on-screen instructions to set a DriveLock user password and enable DriveLock.
7.
To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then
select Yes.
NOTE:
50
Chapter 7 Security
Turn off the computer.
Press the power button, and when the HP logo appears, press
Turn off the tablet.
Press the power button in combination with the volume down button until the Startup menu
is displayed, and then tap f10 to enter Computer Setup.
You can enable DriveLock and set a DriveLock user password before exiting from Computer
50.
If you are using arrow keys to highlight your choice, you must then press enter.
Turn off the computer.
Press the power button, and when the HP logo appears, press
Turn off the tablet.
Press the power button in combination with the volume down button until the Startup menu
is displayed, and then tap f10 to enter Computer Setup.
If you are using arrow keys to highlight your choice, you must then press enter.
Enabling DriveLock and setting a DriveLock user password
f10
to enter Computer Setup.
f10
to enter Computer Setup.
Hide quick links:
Advertisement
Table of Contents
