Siemens SIPART PS2 Compact Operating Instructions page 36

● Stainless steel enclosure
● Flameproof aluminum enclosure
Material
● Enclosure
6DR5..0-... (Makrolon)
6DR5..1-... (Aluminum)
6DR5..2-... (stainless steel)
6DR5..5-... (Aluminum, pressure resistant)
● Pressure gauge block
Versions
● In macrolon enclosure
● In the aluminum enclosure
● In flameproof aluminum enclosure
● In the stainless steel enclosure
Torque for cable gland nut made of
Manometer
● Degree of protection
Manometer made of plastic
Manometer, steel
Manometer made of stainless steel 316
● Vibration resistance
7.1.4 Controller
Control unit
● Five-point controller
● Dead zone
dEbA = auto
dEbA = 0.1 ... 10 %
Analog-to-digital converter
● Scanning time
● Resolution
● Transmission error
● Temperature influence
Cycle time
● 20 mA/HART device
● PA device
● FF device
36
Approximately 3.9 kg (8.6 lb)
Approximately 5.2 kg (11.46 lb)
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel mat. no. 1.4581
GK AISi12
Aluminum AIMgSi, anodized
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
Plastic Metal
2.5 Nm (1.8 ft lb) 4.2 Nm (3.1 ft lb)
IP31
IP44
IP54
In accordance with DIN EN 837-1
Adaptive
Adaptive or can be preset
Adaptive or can be preset
10 ms
≤ 0,05 %
≤ 0,2 %
≤ 0.1 %/10 K (≤ 0.1 %/18 °F)
20 ms
60 ms
60 ms (min. loop time)
Stainless steel
4.2 Nm (3.1 ft lb)
SIPART PS2 (6DR5...)
A5E03436683-02, 01/2013