Siemens SIPART PS2 Operating Instructions Manual page 61

Electropneumatic positioner with profibus pa

Hide thumbs Also See for SIPART PS2:

Table of Contents

3. Connect the module to the basic electronics. For this purpose, use the 6-pin flat ribbon cable

4. Close the positioner as in the description depending on the device version:

– Closing the standard and and intrinsically safe version (Page 55)

– Closing the device version with "flameproof enclosure" (Page 59)

SIPART PS2 with PROFIBUS PA

Operating Instructions, 05/2019, A5E00127926-AC

Installing/mounting

4.5 Installing the optional modules