Installing The Optional Modules; General Information About The Installation Of Option Modules; Opening The Standard And And Intrinsically Safe Version - Siemens SIPART PS2 Operating Instructions Manual

See also
Overview of device components (Ex) (Page 29)
4.5

Installing the optional modules

4.5.1

General information about the installation of option modules

Use in hazardous area
Risk of explosion.
● Only use equipment that is approved for use in the intended hazardous area and labeled
● Do not use devices that have been operated outside the conditions specified for hazardous
4.5.1.1

Opening the standard and and intrinsically safe version

Introduction
The following option modules are available for the positioner in the standard and intrinsically
safe version:
● Position feedback module 6DR4004-6J (Page 60)
● Alarm module 6DR4004-6A (Page 62)
● Slit initiator alarm module (SIA) 6DR4004-6G (Page 64)
● Mechanical limit switch module 6DR4004-6K (Page 66)
● Internal NCS module (iNCS) 6DR4004-5L (Page 70)
● EMC Filter Module 6DR4004-6F (Page 74)
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
WARNING
accordingly.
areas. If you have used the device outside the conditions for hazardous areas, make all Ex
markings unrecognizable on the nameplate.
Installing/mounting
4.5 Installing the optional modules
53