Positioner With Remote Control Electronics; Technical Specifications, 19" Slide-In Module - Siemens SIPART PS2 Operating Instructions Manual

Electropneumatic positioner with profibus pa
Hide thumbs Also See for SIPART PS2:
Table of Contents

Advertisement

F.3

Positioner with remote control electronics

Device view of positioner 6DR5910
F.4

Technical specifications, 19" slide-in module

This section contains the technical specifications of the 19" slide-in module. The technical
specifications of the positioner 6DR5910-... correspond to the technical specifications
(Page 281) of a polycarbonate enclosure.
Rated conditions
Degree of protection
1)
Mounting position
Vibration resistance
● Harmonic oscillations (sine wave) according to DIN
EN 60082-2-6/05.96
● Oscillations (sinusoidal) according to DIN
EN 60068-2-6/04.96
● Shock (half-sine) according to DIN
EN 60068-2-27/02.2010
Climate class
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC
Output: Actuating pressure Y1
Input: Supply air PZ
Output: Actuating pressure Y2 (not for
6DR59..)
Restrictor Y1
Exhaust air outlet with a sound absorber
Transmission ratio selector
Positioner with remote control electronics
F.4 Technical specifications, 19" slide-in module
Friction clutch adjustment wheel
Connecting terminals, positioner
Blanking plug
Cable gland
Wiring diagram on module cover
Purge air switch
IP40 according to IEC/EN 60529
Any
3.5 mm (0.14"), 5 ... 8.4 Hz, 4 cycles/axle
10 m/s² (33 ft/s²), 8.4 ... 500 Hz, 4 cycles/axle
KWU DD 7080.9/93
KTA 3503 from 11.86
150 m/s² (492 ft/s²), 11 ms, 6 shocks/axle
According to IEC/EN 60721-3
359

Advertisement

Table of Contents
loading

Table of Contents